The issue with your vehicle not starting initially and displaying all dashboard warning lights is due to a low voltage condition in the battery. Upon inspection, the battery was found to be at 8.5 volts, which is significantly below the required voltage for proper operation. This indicates that the battery is likely failing, and it appears to be the original Honda battery, which may have reached the end of its service life. The alternator was tested and is functioning correctly, charging at 14.4 volts, so it is not contributing to the issue. We recommend replacing the battery to restore proper voltage levels and ensure reliable operation of the vehicle. Once the new battery is installed, all systems will need to be reset and calibrated to clear the warning lights and ensure everything functions as intended. Addressing this now will prevent further starting issues and potential damage to electronic systems caused by insufficient voltage.
This Interstate Battery comes with a 2-year free replacement warranty. After the first two years, the warranty is prorated for an additional three years (up to 5 years total).
CUSTOMER REQUESTS ENGINE OIL SERVICE.
Hazardous Waste Disposal Fee
CUSTOMER REQUESTS MAINTENANCE AND MULTI-POINT INSPECTION.
SET TIRE PRESSURES TO MANUFACTURER SPECIFICATION
ADAM R. gave our service a 5 star review on 12/30/2024
BRAKE REPLACEMENT WARRANTY: THE BRAKE REPLACEMENT SERVICE PROVIDED IS WARRANTED FOR A PERIOD OF 1 YEAR OR 12,000 MILES, WHICHEVER OCCURS FIRST, FROM THE SERVICE DATE. THIS WARRANTY COVERS THE QUALITY OF THE BRAKE COMPONENTS AND THE WORKMANSHIP OF THE BRAKE REPLACEMENT. WARRANTY CLAIMS OUTSIDE THIS SPECIFIED DURATION OR MILEAGE WILL NOT BE HONORED. IT IS THE RESPONSIBILITY OF THE VEHICLE OWNER TO CONDUCT REGULAR MAINTENANCE AND INSPECTIONS TO ENSURE THE OPTIMAL PERFORMANCE AND LONGEVITY OF THE BRAKING SYSTEM. RETAIN THE SERVICE RECEIPT AS EVIDENCE OF WARRANTY COVERAGE. EXCLUSIONS: THIS WARRANTY EXCLUDES COVERAGE FOR DAMAGES RESULTING FROM MISUSE, NEGLECT, ACCIDENTS, OR OTHER EXTRINSIC FACTORS BEYOND THE CONTROL OF THE SERVICE PROVIDER.
SET TIRE PRESSURES TO MANUFACTURER SPECIFICATION
LISA R. gave our service a 5 star review on 12/15/2024
Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
Hazardous Waste Disposal Fee
Inspect hoses and clamps. Pressure test cooling system. Flush engine, radiator, and heater core in both directions. Check thermostat and electric cooling fan operation.
Hazardous Waste Disposal Fee
Road test for power steering operation. Inspect system for leaks. Flush power steering lines, pump, rack and pinion, and or gear box. Install new power steering fluid. Install power steering additive to revitalize seals. Road test vehicle.
Hazardous Waste Disposal Fee
SPARK PLUGS – Remove & Replace – In-Line4
CUSTOMER REQUESTS MAINTENANCE AND MULTI-POINT INSPECTION.
SET TIRE PRESSURES TO MANUFACTURER SPECIFICATION
ALICE B. gave our service a 5 star review on 10/18/2024
Spot clean affected area and install UV reactive dye to the engine oil. Customer needs to return 150-200 miles after this service for a reinspection (no cost) to create a repair plan addressing the leak(s).
HAZARDOUS WASTE DISPOSAL FEE
CUSTOMER REQUESTS MAINTENANCE AND MULTI-POINT INSPECTION.
SET TIRE PRESSURES TO MANUFACTURER SPECIFICATION
RICH & RENA P. gave our service a 5 star review on 8/30/2024
Includes : Change oil and oil filter. Lube all fittings on steering linkage, ball joints & drive shaft(s). Check and correct all fluid levels to include power steering fluid, coolant, battery acid (unless battery sealed), automatic transmission fluid. Inspect brake fluid. Check tire pressure. Install "Next Service Due" sticker.
Hazardous Waste Disposal Fee
No further services needed
SET TIRE PRESSURES TO MANUFACTURER SPECIFICATION
MIKE & CAROL M. gave our service a 5 star review on 12/29/2023
CUSTOMER REQUESTS MAINTENANCE AND MULTI-POINT INSPECTION.
SET TIRE PRESSURES TO MANUFACTURER SPECIFICATION
TIMING BELT DUE AT 120K, SPARK PLUGS DUE AT 100K MILEAGE OR EVEN SUGGEST TO DO THEM WITH TIMING BELT JOB, IF NEEDED TO WAIT FOR THEM IF CUSTOMER WANTS TO WAIT TO DO WITH TIMING BELT/WATER PUMP JOB
RICH & RENA P. gave our service a 5 star review on 6/9/2023